Machining
Drilling & Holemaking
Drill Bits
Drill Bits for Metal & Plastic
Jobber-Length Drill Bits
High-Speed Steel Jobber-Length Drill Bits
NAS-Spec Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits for Aerospace
Close

Filter Results By

Applied Filters

Clear All

Brand
CHICAGO-LATROBE

Search within these results

Shop By

In Stock Now (83)

Brand

CHICAGO-LATROBE CHICAGO-LATROBE (547)
CLEVELAND CLEVELAND (239)
DRILLCO DRILLCO (230)

Price

Under $10 Under $10 (325)
$10 - $15 $10 - $15 (84)
$15 - $20 $15 - $20 (31)
$20 - $25 $20 - $25 (34)
$25 - $30 $25 - $30 (25)
$30 - $35 $30 - $35 (19)
$35 - $40 (8)

$40 - $50 (15)

$50 - $60 (6)
View more View less

Measurement System

Fractional Inch Fractional Inch (131)
Imperial Imperial (1)
Letter Letter (98)
Metric Metric (68)
Wire Wire (249)

Drill Bit Size

#1 #1 (4)
#2 #2 (4)
#3 #3 (4)
#4 #4 (4)
#5 #5 (4)
#6 #6 (4)
#7 (4)

#8 (4)

#9 (4)

#10 (4)

#11 (4)

#12 (5)

#13 (4)

#14 (4)

#15 (4)

#16 (4)

#17 (4)

#18 (4)

#19 (4)

#20 (4)

#21 (4)

#22 (4)

#23 (4)

#24 (4)

#25 (4)

#26 (4)

#27 (4)

#28 (4)

#29 (4)

#30 (4)

#31 (4)

#32 (4)

#33 (4)

#34 (4)

#35 (4)

#36 (4)

#37 (4)

#38 (4)

#39 (4)

#40 (4)

#41 (4)

#42 (4)

#43 (4)

#44 (4)

#45 (4)

#46 (4)

#47 (4)

#48 (4)

#49 (4)

#50 (4)

#51 (4)

#52 (4)

#53 (2)

#54 (2)

#55 (2)

#56 (2)

#57 (2)

#58 (2)

#59 (2)

#60 (2)

#61 (2)

#62 (2)

#63 (2)

#64 (2)

#65 (1)

#66 (1)

#67 (1)

#68 (1)

#69 (1)

#70 (1)

#71 (1)

#72 (1)

#73 (1)

#74 (1)

#75 (1)

#76 (1)

#77 (1)

#78 (1)

#79 (1)

#80 (1)

1/64 in (1)

1/32 in (4)

3/64 in (4)

1/16 in (4)

5/64 in (4)

3/32 in (5)

7/64 in (5)

1/8 in (5)

9/64 in (5)

5/32 in (4)

11/64 in (4)

3/16 in (4)

13/64 in (4)

7/32 in (4)

15/64 in (5)

1/4 in (4)

17/64 in (4)

9/32 in (6)

19/64 in (4)

5/16 in (4)

21/64 in (4)

11/32 in (4)

23/64 in (4)

3/8 in (4)

25/64 in (4)

13/32 in (4)

27/64 in (4)

7/16 in (4)

29/64 in (4)

15/32 in (4)

31/64 in (4)

1/2 in (4)

1.00 mm (1)

1.10 mm (1)

1.20 mm (1)

1.40 mm (1)

1.5 mm (1)

1.50 mm (1)

1.60 mm (1)

1.70 mm (1)

1.90 mm (1)

2.00 mm (1)

2.10 mm (1)

2.20 mm (1)

2.40 mm (1)

2.5 mm (1)

2.50 mm (1)

2.60 mm (1)

2.70 mm (1)

2.80 mm (1)

2.90 mm (1)

3 mm (1)

3.00 mm (1)

3.10 mm (1)

3.20 mm (1)

3.30 mm (1)

3.50 mm (1)

3.60 mm (1)

3.70 mm (1)

3.80 mm (1)

3.90 mm (1)

4.00 mm (1)

4.10 mm (1)

4.20 mm (1)

4.30 mm (1)

4.50 mm (1)

4.60 mm (1)

4.90 mm (1)

5.00 mm (1)

5.10 mm (1)

5.20 mm (1)

5.40 mm (1)

5.50 mm (1)

5.60 mm (1)

5.70 mm (1)

6.00 mm (1)

6.10 mm (1)

6.20 mm (1)

6.40 mm (1)

6.50 mm (1)

6.60 mm (1)

6.70 mm (1)

6.80 mm (1)

6.90 mm (1)

7.00 mm (1)

7.5 mm (1)

7.50 mm (1)

8.00 mm (1)

8.50 mm (1)

9.00 mm (1)

9.50 mm (1)

10.00 mm (1)

10.20 mm (1)

10.50 mm (1)

11.00 mm (1)

11.5 mm (1)

11.50 mm (1)

12.00 mm (1)

12.50 mm (1)

13.00 mm (1)

A (4)

B (4)

C (4)

D (4)

F (4)

G (4)

H (4)

I (4)

J (4)

K (2)

L (4)

M (4)

N (4)

O (4)

P (4)

Q (4)

R (4)

S (4)

T (4)

U (4)

V (4)

W (4)

X (4)

Y (4)

Z (4)
View more View less

Decimal Equivalent

0.0135 0.0135 (1)
0.0145 0.0145 (1)
0.0156 0.0156 (1)
0.016 0.016 (1)
0.018 0.018 (1)
0.02 0.02 (1)
0.021 (1)

0.0225 (1)

0.024 (1)

0.025 (1)

0.026 (1)

0.028 (1)

0.0292 (1)

0.031 (1)

0.0313 (4)

0.032 (1)

0.033 (1)

0.035 (1)

0.036 (2)

0.037 (2)

0.038 (2)

0.039 (2)

0.0394 (1)

0.04 (2)

0.041 (2)

0.042 (2)

0.043 (2)

0.0433 (1)

0.0465 (2)

0.0469 (4)

0.0472 (1)

0.052 (2)

0.055 (2)

0.0551 (1)

0.0591 (1)

0.0595 (2)

0.0625 (4)

0.063 (1)

0.0635 (4)

0.0669 (1)

0.067 (4)

0.07 (4)

0.073 (4)

0.0748 (1)

0.076 (4)

0.0781 (4)

0.0785 (4)

0.0787 (1)

0.081 (4)

0.082 (4)

0.0827 (1)

0.086 (4)

0.0866 (1)

0.089 (4)

0.0935 (4)

0.0938 (5)

0.0945 (1)

0.096 (4)

0.098 (4)

0.0984 (1)

0.0995 (4)

0.1015 (4)

0.1024 (1)

0.104 (4)

0.1063 (1)

0.1065 (4)

0.1094 (5)

0.11 (4)

0.1102 (1)

0.111 (4)

0.113 (4)

0.1142 (1)

0.116 (4)

0.1181 (1)

0.12 (4)

0.122 (1)

0.125 (4)

0.126 (1)

0.1285 (4)

0.1299 (1)

0.136 (4)

0.1378 (1)

0.1405 (4)

0.1406 (5)

0.1417 (1)

0.144 (4)

0.1457 (1)

0.147 (4)

0.1495 (4)

0.1496 (1)

0.152 (4)

0.1535 (1)

0.154 (4)

0.1563 (4)

0.157 (4)

0.1575 (1)

0.159 (4)

0.161 (4)

0.1614 (1)

0.1654 (1)

0.166 (4)

0.1693 (1)

0.1695 (4)

0.1719 (4)

0.173 (4)

0.177 (4)

0.1772 (1)

0.18 (4)

0.1811 (1)

0.182 (4)

0.185 (4)

0.1875 (4)

0.189 (5)

0.191 (4)

0.1929 (1)

0.1935 (4)

0.196 (4)

0.1969 (1)

0.199 (4)

0.2008 (1)

0.201 (4)

0.2031 (4)

0.204 (4)

0.2047 (1)

0.2055 (4)

0.209 (4)

0.2126 (1)

0.213 (4)

0.2165 (1)

0.2188 (4)

0.2205 (1)

0.221 (4)

0.2244 (1)

0.228 (4)

0.234 (4)

0.2344 (5)

0.2362 (1)

0.238 (4)

0.2402 (1)

0.242 (4)

0.2441 (1)

0.246 (4)

0.25 (4)

0.252 (1)

0.2559 (1)

0.257 (4)

0.2598 (1)

0.261 (4)

0.2638 (1)

0.2656 (4)

0.266 (4)

0.2677 (1)

0.2717 (1)

0.272 (4)

0.2756 (1)

0.277 (4)

0.281 (2)

0.2813 (6)

0.29 (4)

0.295 (4)

0.2953 (1)

0.2969 (4)

0.302 (4)

0.3125 (4)

0.315 (1)

0.316 (4)

0.323 (4)

0.3281 (4)

0.332 (4)

0.3346 (1)

0.339 (4)

0.3438 (4)

0.348 (4)

0.3543 (1)

0.358 (4)

0.3594 (4)

0.368 (4)

0.374 (1)

0.375 (4)

0.377 (4)

0.386 (4)

0.3906 (4)

0.3937 (1)

0.397 (4)

0.4016 (1)

0.404 (4)

0.4063 (4)

0.413 (4)

0.4134 (1)

0.4219 (4)

0.4331 (1)

0.4375 (4)

0.4528 (1)

0.4531 (4)

0.4688 (4)

0.4724 (1)

0.4844 (4)

0.4921 (1)

0.5 (4)

0.5118 (1)

0.0591 in (1)

0.0984 in (1)

0.1181 in (1)

0.1250 in (1)

0.2953 in (1)

0.4528 in (1)
View more View less

Finish - Machining

Black Oxide Black Oxide (189)
Steam Oxide Steam Oxide (6)
TiAlN TiAlN (108)
TiCN TiCN (108)
TiN TiN (136)

Standards

ANSI ANSI (226)
ANSI, NAS 907 Type B ANSI, NAS 907 Type B (4)
NAS 907 Type B NAS 907 Type B (312)
Not Rated Not Rated (1)

Drill Bit Point Type

Radial Point Radial Point (1)
Split Point Split Point (546)

Flute Length

1/8 in 1/8 in (2)
3/16 in 3/16 in (4)
1/4 in 1/4 in (2)
5/16 in 5/16 in (2)
3/8 in 3/8 in (2)
1/2 in 1/2 in (8)
5/8 in (7)

11/16 in (8)

0.7087 in (1)

3/4 in (8)

7/8 in (14)

1 in (24)

1 1/8 in (12)

1.1811 in (1)

1 1/4 in (13)

1.2992 in (1)

1 3/8 in (12)

1 7/16 in (12)

1 1/2 in (17)

1 5/8 in (17)

1 3/4 in (13)

1 7/8 in (12)

2 in (16)

2 1/8 in (20)

2 3/16 in (16)

2 5/16 in (16)

2 7/16 in (20)

2 1/2 in (20)

2 5/8 in (17)

2.7165 in (1)

2 3/4 in (16)

2 7/8 in (24)

2 15/16 in (12)

3 1/16 in (12)

3 3/16 in (8)

3 5/16 in (8)

3 7/16 in (12)

3 1/2 in (12)

3 5/8 in (12)

3.7008 in (1)

3 3/4 in (12)

3 7/8 in (12)

3 15/16 in (4)

4 1/16 in (4)

4 3/16 in (4)

4 5/16 in (4)

4 3/8 in (4)

4 1/2 in (4)

12.00 mm (1)

14.00 mm (1)

16.00 mm (1)

18.00 mm (2)

20.00 mm (2)

22.00 mm (1)

24.00 mm (2)

27.00 mm (1)

30.00 mm (3)

33.00 mm (4)

36.00 mm (3)

39.00 mm (3)

43.00 mm (5)

47.00 mm (3)

52.00 mm (5)

57.00 mm (5)

63.00 mm (6)

69.00 mm (4)

75.00 mm (2)

81.00 mm (2)

87.00 mm (3)

94.00 mm (2)

101.00 mm (3)
View more View less

Shank Dia.

1/64 in 1/64 in (18)
1/32 in 1/32 in (21)
3/64 in 3/64 in (10)
0.0591 in 0.0591 in (1)
1/16 in 1/16 in (28)
5/64 in 5/64 in (24)
3/32 in (29)

0.0984 in (1)

7/64 in (25)

0.1181 in (1)

1/8 in (22)

9/64 in (24)

5/32 in (20)

11/64 in (24)

3/16 in (32)

13/64 in (16)

7/32 in (16)

15/64 in (17)

1/4 in (16)

17/64 in (20)

9/32 in (8)

0.2953 in (1)

19/64 in (8)

5/16 in (16)

21/64 in (8)

11/32 in (12)

23/64 in (8)

3/8 in (16)

25/64 in (12)

13/32 in (4)

27/64 in (4)

7/16 in (8)

0.4528 in (1)

15/32 in (4)

31/64 in (4)

1/2 in (4)

1 3/32 in (1)

1 3/16 in (1)

1 25/64 in (1)

1 1/2 in (1)

1 19/32 in (1)

1 11/16 in (1)

1 57/64 in (1)

1 mm (1)

2 mm (1)

2.1 mm (1)

2.2 mm (1)

2.4 mm (1)

2.5 mm (1)

2.6 mm (1)

2.7 mm (1)

2.8 mm (1)

2.9 mm (1)

3 mm (1)

3.1 mm (1)

3.2 mm (1)

3.3 mm (1)

3.5 mm (1)

3.6 mm (1)

3.7 mm (1)

3.8 mm (1)

3.9 mm (1)

4 mm (1)

4.1 mm (1)

4.2 mm (1)

4.3 mm (1)

4.5 mm (1)

4.6 mm (1)

4.8 mm (1)

4.9 mm (1)

5 mm (1)

5.1 mm (1)

5.2 mm (1)

5.4 mm (1)

5.5 mm (1)

5.6 mm (1)

5.7 mm (1)

6 mm (1)

6.1 mm (1)

6.2 mm (1)

6.4 mm (1)

6.5 mm (1)

6.6 mm (1)

6.7 mm (1)

6.8 mm (1)

6.9 mm (1)

7 mm (1)

7.5 mm (1)

8 mm (1)

8.5 mm (1)

9 mm (1)

9.5 mm (1)

10 mm (1)

10.2 mm (1)

10.5 mm (1)

11 mm (1)

11.5 mm (1)

12 mm (1)

12.5 mm (1)

13 mm (1)
View more View less

Overall Length

3/4 in 3/4 in (3)
7/8 in 7/8 in (3)
1 in 1 in (2)
1 1/8 in 1 1/8 in (2)
1 1/4 in 1 1/4 in (2)
1 3/8 in 1 3/8 in (8)
1 1/2 in (7)

1.575 in (1)

1 5/8 in (8)

1 3/4 in (8)

1 7/8 in (14)

2 in (24)

2 1/8 in (12)

2.244 in (1)

2 1/4 in (12)

2 3/8 in (12)

2.402 in (1)

2 1/2 in (12)

2 5/8 in (16)

2 3/4 in (16)

2 7/8 in (12)

3 in (12)

3 1/8 in (16)

3 1/4 in (20)

3 3/8 in (16)

3 1/2 in (16)

3 5/8 in (20)

3 3/4 in (20)

3 7/8 in (16)

4 in (16)

4 1/8 in (24)

4 1/4 in (12)

4.291 in (1)

4 3/8 in (12)

4 1/2 in (8)

4 5/8 in (8)

4 3/4 in (12)

4 7/8 in (12)

5 in (12)

5 1/8 in (12)

5 1/4 in (12)

5 3/8 in (4)

5 1/2 in (4)

5.591 in (1)

5 5/8 in (4)

5 3/4 in (4)

5 7/8 in (4)

6 in (9)

34.00 mm (1)

36.00 mm (1)

38.00 mm (1)

40.00 mm (2)

43.00 mm (2)

46.00 mm (1)

49.00 mm (2)

53.00 mm (1)

57.00 mm (3)

61.00 mm (4)

65.00 mm (3)

70.00 mm (3)

75.00 mm (5)

80.00 mm (3)

86.00 mm (5)

93.00 mm (5)

101.00 mm (6)

109.00 mm (4)

117.00 mm (2)

125.00 mm (2)

133.00 mm (3)

142.00 mm (2)

151.00 mm (3)
View more View less

Primary Material Application

Cast Iron, Stainless Steel, Steel Cast Iron, Stainless Steel, Steel (199)
Cast Iron, Stainless Steel, Steel, Titanium, Tool and Die Steel Cast Iron, Stainless Steel, Steel, Titanium, Tool and Die Steel (165)
Cast Iron, Stainless Steel, Steel, Tool and Die Steel Cast Iron, Stainless Steel, Steel, Tool and Die Steel (173)
Cast Iron, Steel Cast Iron, Steel (5)
Stainless Steel, Tool Steel, Alloy Steel, Titanium, Cast Iron Stainless Steel, Tool Steel, Alloy Steel, Titanium, Cast Iron (5)

Series

150ASP 150ASP (190)
150ASP-TA 150ASP-TA (108)
150ASP-TC 150ASP-TC (108)
150ASP-TN 150ASP-TN (136)

NAS-Spec Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits for Aerospace

These high-speed steel jobber-length drill bits meet National Aerospace Specifications (NAS) for drill bits used in aircraft production and repair. These drill bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed. The bits are made from high-speed steel. They provide more flexibility and absorb more shock and vibration than cobalt, powdered-metal, and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece. Jobber-length drill bits are the most commonly used drill-bit length. They provide a good balance of strength and accuracy when drilling into a range of materials.

https://catalogue.grainger.ca/?hybris=true

547 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

JOBBER LENGTH DRILL BIT, #59 DRILL BIT SIZE, 11/16 IN FLUTE L, 1⅝ IN LENGTH, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #59 DRILL BIT SIZE, 11/16 IN FLUTE L, 1⅝ IN LENGTH, HSS
Item # GNF150ASP44729
Mfr. Model # 150ASP44729

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 1/32 inch diameter, 15/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 1⅝ inch length. Plus it has two 11/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 1/32 inch diameter, 15/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 1⅝ inch length. Plus it has two 11/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.85 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #3 DRILL BIT SIZE, 2½ IN FLUTE L, 3¾ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #3 DRILL BIT SIZE, 2½ IN FLUTE L, 3¾ IN L, HIGH SPEED STEEL
Item # GNF150ASP45673
Mfr. Model # 150ASP45673

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 13/64 inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 13/64 inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.80 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #56 DRILL BIT SIZE, ¾ IN FLUTE L, 1¾ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #56 DRILL BIT SIZE, ¾ IN FLUTE L, 1¾ IN L, HIGH SPEED STEEL
Item # GNF150ASP44726
Mfr. Model # 150ASP44726

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 1/32 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 1¾ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 1/32 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 1¾ inch length. Plus it has two ¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.83 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #32 DRILL BIT SIZE, 1⅝ IN FLUTE L, 2¾ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #32 DRILL BIT SIZE, 1⅝ IN FLUTE L, 2¾ IN L, HIGH SPEED STEEL
Item # GNF150ASP45702
Mfr. Model # 150ASP45702

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 7/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 7/64 inch diameter, 1⅛ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.94 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #38 DRILL BIT SIZE, 1-7/16 IN FLUTE L, 2½ IN LENGTH, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #38 DRILL BIT SIZE, 1-7/16 IN FLUTE L, 2½ IN LENGTH, HSS
Item # GNF150ASP45708
Mfr. Model # 150ASP45708

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.18 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #43 DRILL BIT SIZE, 1¼ IN FLUTE L, 2¼ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #43 DRILL BIT SIZE, 1¼ IN FLUTE L, 2¼ IN L, HIGH SPEED STEEL
Item # GNF150ASP45713
Mfr. Model # 150ASP45713

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 5/64 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 5/64 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.13 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #49 DRILL BIT SIZE, 1 IN FLUTE L, 2 IN LENGTH, 4XD, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #49 DRILL BIT SIZE, 1 IN FLUTE L, 2 IN LENGTH, 4XD, HSS
Item # GNF150ASP45719
Mfr. Model # 150ASP45719

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 1/16 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has two one-inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 1/16 inch diameter, one-inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a two-inch length. Plus it has two one-inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.08 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, C DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN LENGTH, 4XD, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, C DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN LENGTH, 4XD, HSS
Item # GNF150ASP45773
Mfr. Model # 150ASP45773

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 15/64 inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a four-inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 15/64 inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a four-inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.37 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, S DRILL BIT SIZE, 3½ IN FLUTE L, 4⅞ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, S DRILL BIT SIZE, 3½ IN FLUTE L, 4⅞ IN L, HIGH SPEED STEEL
Item # GNF150ASP45789
Mfr. Model # 150ASP45789

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 11/32 inch diameter, 1⅜ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a 4⅞ inch length. Plus it has two 3½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 11/32 inch diameter, 1⅜ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a 4⅞ inch length. Plus it has two 3½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $15.37 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, R DRILL BIT SIZE, 3-7/16 IN FLUTE L, 4¾ IN LENGTH, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, R DRILL BIT SIZE, 3-7/16 IN FLUTE L, 4¾ IN LENGTH, HSS
Item # GNF150ASP45788
Mfr. Model # 150ASP45788

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 21/64 inch diameter, 1 5/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a 4¾ inch length. Plus it has two 3 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 21/64 inch diameter, 1 5/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a 4¾ inch length. Plus it has two 3 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $14.91 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #10 DRILL BIT SIZE, 2-7/16 IN FLUTE L, 3⅝ IN LENGTH, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #10 DRILL BIT SIZE, 2-7/16 IN FLUTE L, 3⅝ IN LENGTH, HSS
Item # GNF150ASP45680
Mfr. Model # 150ASP45680

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 3/16 inch diameter, 1 3/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 3⅝ inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 3/16 inch diameter, 1 3/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has wire measurements. It is non-coolant through with a 3⅝ inch length. Plus it has two 2 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $4.92 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 13/32 IN DRILL BIT SIZE, 3⅞ IN FLUTE L, NAS 907 TYPE B, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, 13/32 IN DRILL BIT SIZE, 3⅞ IN FLUTE L, NAS 907 TYPE B, HSS
Item # GNF150ASP45626
Mfr. Model # 150ASP45626

EHC: EHC :

Heavy-duty, high speed Jobber length drill bit is list No. 150ASP with a black oxide finish. 135 degree split point and is for medium to heavy-duty applications in tougher materials such as titanium.

Heavy-duty, high speed Jobber length drill bit is list No. 150ASP with a black oxide finish. 135 degree split point and is for medium to heavy-duty applications in tougher materials such as titanium.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1273

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $17.48 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, ⅛ IN DRILL BIT SIZE, 1⅝ IN FLUTE L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, ⅛ IN DRILL BIT SIZE, 1⅝ IN FLUTE L, HIGH SPEED STEEL
Item # GNF150ASP45608
Mfr. Model # 150ASP45608

EHC: EHC :

Heavy-duty, high speed Jobber length drill bit is list No. 150ASP with a black oxide finish. 135 degree split point and is for medium to heavy-duty applications in tougher materials such as titanium.

Heavy-duty, high speed Jobber length drill bit is list No. 150ASP with a black oxide finish. 135 degree split point and is for medium to heavy-duty applications in tougher materials such as titanium.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1273

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $2.94 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 17/64 IN DRILL BIT SIZE, 2⅞ IN FLUTE L, NAS 907 TYPE B, HSS

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, 17/64 IN DRILL BIT SIZE, 2⅞ IN FLUTE L, NAS 907 TYPE B, HSS
Item # GNF150ASP45617
Mfr. Model # 150ASP45617

EHC: EHC :

Heavy-duty, high speed Jobber length drill bit is list No. 150ASP with a black oxide finish. 135 degree split point and is for medium to heavy-duty applications in tougher materials such as titanium.

Heavy-duty, high speed Jobber length drill bit is list No. 150ASP with a black oxide finish. 135 degree split point and is for medium to heavy-duty applications in tougher materials such as titanium.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1273

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.00 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 3-1/16 IN FLUTE L, 4⅜ IN LENGTH, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, 3-1/16 IN FLUTE L, 4⅜ IN LENGTH, HIGH SPEED STEEL
Item # GNF150ASP45784
Mfr. Model # 150ASP45784

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 19/64 inch diameter, 1 5/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a 4⅜ inch length. Plus it has two 3 1/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 19/64 inch diameter, 1 5/16 inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a 4⅜ inch length. Plus it has two 3 1/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $11.79 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, H DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L, HIGH SPEED STEEL

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, H DRILL BIT SIZE, 2⅞ IN FLUTE L, 4⅛ IN L, HIGH SPEED STEEL
Item # GNF150ASP45778
Mfr. Model # 150ASP45778

EHC: EHC :

This high-performance jobber length drill bit is made of high speed steel and has a 17/64 inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This high-performance jobber length drill bit is made of high speed steel and has a 17/64 inch diameter, 1¼ inch long shank. It is for use with cast iron, steel, and meets the standards for NAS 907 Type B. This 150ASP series jobber length drill bit has a black oxide finish, and has letter measurements. It is non-coolant through with a 4⅛ inch length. Plus it has two 2⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $8.90 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Apply

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

NAS-Spec Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits for Aerospace

547 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

NAS-Spec Non-Coolant-Through High-Speed Steel Jobber-Length Drill Bits for Aerospace

547 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All