Machining
Drilling & Holemaking
Drill Bits
Drill Bits for Metal & Plastic
Jobber-Length Drill Bits
Cobalt Jobber-Length Drill Bits
Close

Filter Results By

Applied Filters

Clear All

Brand
CHICAGO-LATROBE

Search within these results

Shop By

In Stock Now (226)

Brand

BOSCH BOSCH (1)
CHICAGO-LATROBE CHICAGO-LATROBE (950)
CLARKSON-OSBORN CLARKSON-OSBORN (69)
CLE-LINE CLE-LINE (75)
CLEVELAND CLEVELAND (711)
DRILLCO DRILLCO (159)
JET (13)

OSG (48)

WALTER SURFACE TECHNOLOGIES (94)

WESTWARD (104)
View more View less

Price

Under $10 Under $10 (509)
$10 - $15 $10 - $15 (128)
$15 - $20 $15 - $20 (76)
$20 - $25 $20 - $25 (57)
$25 - $30 $25 - $30 (39)
$30 - $35 $30 - $35 (28)
$35 - $40 (21)

$40 - $50 (35)

$50 - $60 (29)

$60 - $70 (10)

$70 - $80 (5)

$90 - $100 (2)

$100 - $200 (11)
View more View less

Measurement System

Fractional Inch Fractional Inch (247)
Fractional Inch, Letter Fractional Inch, Letter (1)
Letter Letter (124)
Metric Metric (235)
Wire Wire (343)

Drill Bit Size

#1 #1 (6)
#2 #2 (6)
#3 #3 (6)
#4 #4 (6)
#5 #5 (5)
#6 #6 (6)
#7 (5)

#8 (6)

#9 (6)

#10 (5)

#11 (6)

#12 (10)

#13 (8)

#14 (6)

#15 (6)

#16 (6)

#17 (6)

#18 (6)

#19 (6)

#20 (5)

#21 (5)

#22 (6)

#23 (6)

#24 (6)

#25 (5)

#26 (6)

#27 (5)

#28 (6)

#29 (6)

#30 (5)

#31 (6)

#32 (6)

#33 (5)

#34 (6)

#35 (6)

#36 (6)

#37 (6)

#38 (6)

#39 (6)

#40 (5)

#41 (6)

#42 (6)

#43 (6)

#44 (6)

#45 (6)

#46 (6)

#47 (6)

#48 (6)

#49 (6)

#50 (5)

#51 (6)

#52 (6)

#53 (2)

#54 (2)

#55 (2)

#56 (2)

#57 (2)

#58 (2)

#59 (2)

#60 (2)

#61 (1)

#62 (1)

#63 (1)

#64 (1)

#65 (1)

#66 (1)

#67 (1)

#68 (1)

#69 (1)

#70 (1)

#71 (1)

#72 (1)

#73 (1)

#74 (1)

#75 (1)

#76 (1)

#77 (1)

#78 (1)

#79 (1)

#80 (1)

1/64 in (1)

1/32 in (2)

3/64 in (2)

1/16 in (8)

5/64 in (8)

3/32 in (8)

7/64 in (8)

1/8 in (8)

9/64 in (8)

5/32 in (8)

11/64 in (8)

3/16 in (8)

13/64 in (8)

7/32 in (8)

15/64 in (8)

1/4 in (7)

17/64 in (8)

9/32 in (8)

19/64 in (8)

5/16 in (7)

21/64 in (8)

11/32 in (8)

23/64 in (8)

3/8 in (7)

25/64 in (8)

13/32 in (8)

27/64 in (8)

7/16 in (8)

29/64 in (8)

15/32 in (8)

31/64 in (8)

1/2 in (8)

33/64 in (1)

17/32 in (1)

35/64 in (1)

9/16 in (1)

37/64 in (1)

19/32 in (1)

39/64 in (1)

5/8 in (1)

41/64 in (1)

21/32 in (1)

43/64 in (1)

11/16 in (1)

516 in (1)

1 mm (1)

1.00 mm (3)

1.10 mm (1)

1.20 mm (3)

1.25 mm (1)

1.30 mm (2)

1.40 mm (2)

1.45 mm (1)

1.5 mm (1)

1.50 mm (3)

1.55 mm (1)

1.60 mm (2)

1.65 mm (1)

1.70 mm (1)

1.80 mm (2)

1.90 mm (2)

2 mm (1)

2.00 mm (3)

2.05 mm (1)

2.10 mm (2)

2.20 mm (2)

2.30 mm (2)

2.40 mm (4)

2.5 mm (1)

2.50 mm (3)

2.60 mm (2)

2.70 mm (1)

2.80 mm (4)

2.90 mm (2)

3 mm (1)

3.00 mm (3)

3.10 mm (3)

3.20 mm (4)

3.30 mm (4)

3.40 mm (2)

3.5 mm (1)

3.50 mm (3)

3.60 mm (3)

3.7 mm (1)

3.70 mm (3)

3.80 mm (1)

3.90 mm (2)

4 mm (1)

4.00 mm (3)

4.10 mm (3)

4.2 mm (1)

4.20 mm (3)

4.30 mm (2)

4.40 mm (1)

4.5 mm (1)

4.50 mm (3)

4.60 mm (3)

4.90 mm (3)

5 mm (1)

5.00 mm (3)

5.10 mm (3)

5.20 mm (3)

5.30 mm (1)

5.40 mm (1)

5.50 mm (4)

5.60 mm (1)

5.70 mm (3)

5.80 mm (2)

5.90 mm (1)

6 mm (1)

6.00 mm (3)

6.10 mm (2)

6.20 mm (2)

6.30 mm (1)

6.40 mm (2)

6.5 mm (1)

6.50 mm (3)

6.60 mm (2)

6.70 mm (3)

6.8 mm (1)

6.80 mm (3)

6.90 mm (1)

7 mm (1)

7.00 mm (3)

7.10 mm (1)

7.20 mm (1)

7.40 mm (1)

7.5 mm (1)

7.50 mm (3)

7.80 mm (1)

7.90 mm (1)

8 mm (1)

8.00 mm (3)

8.10 mm (2)

8.20 mm (1)

8.30 mm (1)

8.40 mm (1)

8.50 mm (4)

8.60 mm (1)

8.70 mm (2)

8.80 mm (1)

8.90 mm (1)

9 mm (1)

9.00 mm (3)

9.30 mm (1)

9.40 mm (1)

9.50 mm (4)

9.60 mm (1)

9.80 mm (1)

10 mm (1)

10.00 mm (3)

10.20 mm (4)

10.5 mm (1)

10.50 mm (3)

10.80 mm (1)

11.00 mm (4)

11.2 mm (1)

11.50 mm (4)

12 mm (1)

12.00 mm (3)

12.50 mm (4)

13 mm (1)

13.00 mm (3)

1/4-E in (1)

A (5)

B (5)

C (5)

D (4)

F (5)

G (5)

H (5)

I (5)

J (6)

K (5)

L (5)

M (4)

N (5)

O (5)

P (5)

Q (5)

R (5)

S (5)

T (5)

U (5)

V (5)

W (5)

X (5)

Y (5)

Z (5)
View more View less

Decimal Equivalent

0.0135 0.0135 (1)
0.0145 0.0145 (1)
0.0156 0.0156 (1)
0.016 0.016 (1)
0.018 0.018 (1)
0.02 0.02 (1)
0.021 (1)

0.0225 (1)

0.024 (1)

0.025 (1)

0.026 (1)

0.028 (1)

0.0292 (1)

0.031 (1)

0.0313 (2)

0.032 (1)

0.033 (1)

0.035 (1)

0.036 (1)

0.037 (1)

0.038 (1)

0.039 (1)

0.0394 (3)

0.04 (2)

0.041 (2)

0.042 (2)

0.043 (2)

0.0433 (1)

0.0465 (2)

0.0469 (2)

0.0472 (3)

0.0492 (1)

0.0512 (2)

0.052 (2)

0.055 (2)

0.0551 (2)

0.0571 (1)

0.0591 (3)

0.0595 (2)

0.061 (1)

0.0625 (7)

0.063 (2)

0.0635 (6)

0.065 (1)

0.0669 (1)

0.067 (6)

0.07 (5)

0.0709 (2)

0.073 (6)

0.0748 (2)

0.076 (6)

0.0781 (7)

0.0785 (6)

0.0787 (3)

0.0807 (1)

0.081 (6)

0.082 (6)

0.0827 (2)

0.086 (6)

0.0866 (2)

0.089 (6)

0.0906 (2)

0.0935 (6)

0.0938 (7)

0.0945 (4)

0.096 (5)

0.098 (5)

0.0984 (3)

0.0995 (6)

0.1015 (6)

0.1024 (2)

0.104 (6)

0.1063 (1)

0.1065 (5)

0.1094 (7)

0.11 (6)

0.1102 (4)

0.111 (6)

0.113 (5)

0.1142 (2)

0.116 (6)

0.1181 (3)

0.12 (6)

0.122 (3)

0.125 (6)

0.1250 (1)

0.126 (4)

0.1285 (5)

0.1299 (4)

0.1339 (2)

0.136 (5)

0.1378 (3)

0.1405 (6)

0.1406 (7)

0.1417 (3)

0.144 (5)

0.1457 (3)

0.147 (6)

0.1495 (5)

0.1496 (1)

0.152 (6)

0.1535 (2)

0.154 (6)

0.1562 (2)

0.1563 (5)

0.157 (6)

0.1575 (3)

0.159 (5)

0.161 (5)

0.1614 (3)

0.1654 (3)

0.166 (6)

0.1693 (2)

0.1695 (6)

0.1719 (7)

0.173 (6)

0.1732 (1)

0.177 (6)

0.1772 (3)

0.18 (6)

0.1811 (3)

0.182 (6)

0.185 (8)

0.1875 (7)

0.189 (10)

0.191 (5)

0.1929 (3)

0.1935 (5)

0.196 (6)

0.1969 (3)

0.199 (6)

0.2008 (3)

0.201 (5)

0.2031 (7)

0.204 (6)

0.2047 (3)

0.2055 (5)

0.2087 (1)

0.209 (6)

0.2126 (1)

0.213 (6)

0.2165 (4)

0.2188 (7)

0.2205 (1)

0.221 (6)

0.2244 (3)

0.228 (6)

0.2283 (2)

0.2323 (1)

0.234 (5)

0.2344 (7)

0.2362 (3)

0.238 (5)

0.2402 (2)

0.242 (5)

0.2441 (2)

0.246 (4)

0.248 (1)

0.25 (6)

0.2500 (1)

0.252 (2)

0.2559 (3)

0.257 (4)

0.2598 (2)

0.261 (5)

0.2638 (3)

0.2656 (7)

0.266 (5)

0.2677 (3)

0.2717 (1)

0.272 (5)

0.2756 (3)

0.277 (6)

0.2795 (1)

0.281 (5)

0.2812 (2)

0.2813 (5)

0.2835 (1)

0.29 (5)

0.2913 (1)

0.295 (4)

0.2953 (3)

0.2969 (7)

0.302 (5)

0.3071 (1)

0.311 (1)

0.3125 (7)

0.315 (3)

0.316 (5)

0.3189 (2)

0.3228 (1)

0.323 (5)

0.3268 (1)

0.3281 (7)

0.3307 (1)

0.332 (4)

0.3346 (4)

0.3386 (1)

0.339 (5)

0.3425 (2)

0.3438 (7)

0.3465 (1)

0.348 (5)

0.3504 (1)

0.3543 (3)

0.358 (5)

0.3594 (7)

0.3661 (1)

0.368 (5)

0.3701 (1)

0.374 (4)

0.375 (6)

0.3750 (1)

0.377 (5)

0.378 (1)

0.3858 (1)

0.386 (5)

0.3906 (7)

0.3937 (3)

0.397 (5)

0.4016 (4)

0.404 (5)

0.4062 (2)

0.4063 (5)

0.413 (5)

0.4134 (3)

0.4219 (7)

0.4252 (1)

0.4331 (4)

0.4375 (7)

0.4528 (4)

0.4531 (7)

0.4688 (7)

0.4724 (3)

0.4844 (7)

0.4921 (4)

0.5 (6)

0.5000 (1)

0.5118 (3)

0.5156 (1)

0.5313 (1)

0.5469 (1)

0.5625 (1)

0.5781 (1)

0.5938 (1)

0.6094 (1)

0.625 (1)

0.6406 (1)

0.6563 (1)

0.6719 (1)

0.6875 (1)

0.0394 in (1)

0.0591 in (1)

0.0625 in (1)

0.0781 in (1)

0.0787 in (1)

0.0938 in (1)

0.096 in (1)

0.0984 in (1)

0.1065 in (1)

0.1094 in (1)

0.1181 in (1)

0.125 in (1)

0.136 in (1)

0.1378 in (1)

0.1406 in (1)

0.1457 in (1)

0.1563 in (1)

0.1575 in (1)

0.1654 in (1)

0.1719 in (1)

0.1772 in (1)

0.1875 in (1)

0.191 in (1)

0.1969 in (1)

0.2031 in (1)

0.2188 in (1)

0.2344 in (1)

0.2362 in (1)

0.25 in (1)

0.2559 in (1)

0.257 in (1)

0.2656 in (1)

0.2677 in (1)

0.2756 in (1)

0.2813 in (1)

0.295 in (1)

0.2969 in (1)

0.3125 in (1)

0.315 in (1)

0.3281 in (1)

0.332 in (1)

0.3438 in (1)

0.3543 in (1)

0.3594 in (1)

0.3906 in (1)

0.3937 in (1)

0.4063 in (1)

0.4134 in (1)

0.4219 in (1)

0.4375 in (1)

0.4409 in (1)

0.4531 in (1)

0.4688 in (1)

0.4724 in (1)

0.4844 in (1)

0.5 in (1)

0.5118 in (1)
View more View less

Finish - Machining

Straw Straw (29)
Straw/Bronze Straw/Bronze (494)
TiAlN TiAlN (108)
TiN TiN (319)

Standards

ANSI ANSI (2)
ANSI, NAS 907 Type J ANSI, NAS 907 Type J (156)
ASME B94.11M ASME B94.11M (199)
DIN 338 DIN 338 (65)
DIN 338, NAS 907 Type J DIN 338, NAS 907 Type J (43)
NAS 907 Type B NAS 907 Type B (166)
NAS 907 Type J (290)
View more View less

Cutting Direction

Left Hand Left Hand (29)
Right Hand Right Hand (921)

Drill Bit Point Type

Radial Point Radial Point (2)
Split Point Split Point (948)

Flute Length

1/8 in 1/8 in (2)
3/16 in 3/16 in (4)
1/4 in 1/4 in (2)
5/16 in 5/16 in (2)
3/8 in 3/8 in (2)
0.4724 in 0.4724 in (1)
1/2 in (6)

5/8 in (4)

11/16 in (7)

0.7087 in (1)

3/4 in (6)

0.875 in (1)

7/8 in (19)

0.9449 in (1)

1 in (36)

1.000 in (1)

1 1/8 in (19)

1.1811 in (1)

1 1/4 in (19)

1.25 in (1)

1.2992 in (1)

1 3/8 in (16)

1.375 in (1)

1 7/16 in (17)

1.4375 in (1)

1 1/2 in (24)

1.5 in (1)

1.5354 in (2)

1 5/8 in (23)

1.625 in (1)

1.6929 in (2)

1 3/4 in (18)

1.75 in (2)

1.8504 in (1)

1 7/8 in (16)

2 in (24)

2.000 in (1)

2.0472 in (1)

2 1/8 in (30)

2.125 in (1)

2 3/16 in (24)

2.2441 in (1)

2.312 in (1)

2 5/16 in (23)

2.3125 in (2)

2.437 in (1)

2 7/16 in (28)

2.4375 in (1)

2.4803 in (1)

2 1/2 in (30)

2.5 in (1)

2 5/8 in (23)

2.625 in (1)

2.7165 in (3)

2 3/4 in (21)

2.75 in (1)

2 7/8 in (32)

2.875 in (2)

2.937 in (1)

2 15/16 in (16)

2.9375 in (1)

2.9528 in (1)

3.062 in (1)

3 1/16 in (15)

3.0625 in (1)

3 1/8 in (1)

3.187 in (1)

3 3/16 in (11)

3.1875 in (1)

3.189 in (1)

3.312 in (1)

3 5/16 in (11)

3.3125 in (1)

3.4252 in (2)

3.437 in (1)

3 7/16 in (15)

3.4375 in (2)

3 1/2 in (17)

3.5 in (1)

3 5/8 in (17)

3.7008 in (1)

3 3/4 in (17)

3.75 in (1)

3 7/8 in (16)

3.875 in (2)

3.937 in (1)

3 15/16 in (6)

3.9375 in (1)

3.9764 in (2)

4.062 in (1)

4 1/16 in (6)

4.0625 in (1)

4.187 in (1)

4 3/16 in (6)

4.1875 in (1)

4.312 in (1)

4 5/16 in (6)

4.3125 in (1)

4 3/8 in (7)

4.375 in (1)

4 1/2 in (7)

4.5 in (1)

4 13/16 in (5)

5 3/16 in (5)

5 5/8 in (2)

12.00 mm (3)

14.00 mm (1)

16.00 mm (6)

18.00 mm (6)

20.00 mm (5)

22.00 mm (4)

24.00 mm (6)

27.00 mm (4)

30.00 mm (9)

33.00 mm (10)

36.00 mm (11)

39.00 mm (11)

43.00 mm (13)

47.00 mm (11)

52.00 mm (17)

57.00 mm (15)

63.00 mm (15)

69.00 mm (13)

75.00 mm (14)

81.00 mm (13)

87.00 mm (12)

94.00 mm (9)

101.00 mm (10)
View more View less

Shank Dia.

1/64 in 1/64 in (16)
1/32 in 1/32 in (17)
0.0394 in 0.0394 in (1)
3/64 in 3/64 in (8)
0.0591 in 0.0591 in (1)
0.0625 in 0.0625 in (1)
1/16 in (42)

0.0781 in (1)

5/64 in (37)

0.0787 in (1)

3/32 in (40)

0.0938 in (1)

0.096 in (1)

0.0984 in (1)

0.1065 in (1)

7/64 in (36)

0.1094 in (1)

0.1181 in (1)

0.125 in (1)

1/8 in (29)

0.136 in (1)

0.1378 in (1)

0.1406 in (1)

9/64 in (34)

0.1457 in (1)

5/32 in (29)

0.1563 in (1)

0.1575 in (1)

0.1654 in (1)

11/64 in (37)

0.1719 in (1)

0.1772 in (1)

0.1875 in (1)

3/16 in (46)

0.191 in (1)

0.1969 in (1)

0.2031 in (1)

13/64 in (24)

7/32 in (24)

0.2188 in (1)

15/64 in (21)

0.2344 in (1)

0.2362 in (1)

0.25 in (1)

1/4 in (22)

0.2559 in (1)

0.257 in (1)

0.2656 in (1)

17/64 in (28)

0.2677 in (1)

0.2756 in (1)

9/32 in (10)

0.2813 in (1)

0.2953 in (1)

19/64 in (11)

0.2969 in (1)

0.3020 in (1)

0.3125 in (1)

5/16 in (21)

0.315 in (1)

0.3160 in (1)

0.3230 in (1)

0.3281 in (1)

21/64 in (10)

0.332 in (1)

11/32 in (15)

0.3438 in (1)

0.3480 in (1)

0.3543 in (1)

0.3580 in (1)

23/64 in (13)

0.3594 in (1)

3/8 in (23)

0.3906 in (1)

25/64 in (15)

0.3937 in (1)

0.3970 in (1)

0.4040 in (1)

13/32 in (5)

0.4063 in (1)

0.4130 in (1)

0.4134 in (1)

27/64 in (7)

0.4219 in (1)

0.4375 in (1)

7/16 in (13)

0.4409 in (1)

0.4531 in (1)

29/64 in (1)

15/32 in (7)

0.4688 in (1)

0.4724 in (1)

31/64 in (7)

0.4844 in (1)

0.5 in (1)

1/2 in (8)

0.5118 in (1)

33/64 in (1)

35/64 in (1)

9/16 in (2)

19/32 in (1)

39/64 in (1)

5/8 in (2)

41/64 in (1)

43/64 in (1)

11/16 in (1)

1 3/32 in (1)

1 3/16 in (3)

1 1/4 in (1)

1 19/64 in (2)

1 25/64 in (2)

1 7/16 in (1)

1 1/2 in (3)

1 35/64 in (1)

1 19/32 in (2)

1 41/64 in (1)

1 11/16 in (1)

1 51/64 in (2)

1 57/64 in (2)

1 mm (3)

2 mm (4)

2.1 mm (2)

2.2 mm (2)

2.3 mm (2)

2.4 mm (4)

2.5 mm (3)

2.6 mm (2)

2.7 mm (1)

2.8 mm (4)

2.9 mm (2)

3 mm (3)

3.1 mm (3)

3.2 mm (4)

3.3 mm (4)

3.4 mm (2)

3.5 mm (3)

3.6 mm (3)

3.7 mm (3)

3.8 mm (1)

3.9 mm (3)

4 mm (3)

4.1 mm (3)

4.2 mm (3)

4.3 mm (2)

4.4 mm (1)

4.5 mm (3)

4.6 mm (3)

4.7 mm (2)

4.8 mm (4)

4.9 mm (3)

5 mm (3)

5.1 mm (3)

5.2 mm (3)

5.3 mm (1)

5.4 mm (1)

5.5 mm (4)

5.6 mm (1)

5.7 mm (3)

5.8 mm (2)

5.9 mm (1)

6 mm (3)

6.1 mm (2)

6.2 mm (2)

6.3 mm (1)

6.4 mm (2)

6.5 mm (3)

6.6 mm (2)

6.7 mm (3)

6.8 mm (3)

6.9 mm (1)

7 mm (3)

7.1 mm (1)

7.2 mm (1)

7.4 mm (1)

7.5 mm (3)

7.8 mm (1)

7.9 mm (1)

8 mm (3)

8.1 mm (2)

8.2 mm (1)

8.3 mm (1)

8.4 mm (1)

8.5 mm (4)

8.6 mm (1)

8.7 mm (2)

8.8 mm (1)

8.9 mm (1)

9 mm (3)

9.3 mm (1)

9.4 mm (1)

9.5 mm (3)

9.6 mm (1)

9.8 mm (1)

10 mm (3)

10.2 mm (4)

10.5 mm (3)

10.8 mm (1)

11 mm (4)

11.5 mm (4)

12 mm (3)

12.5 mm (4)

13 mm (3)
View more View less

Overall Length

3/4 in 3/4 in (3)
7/8 in 7/8 in (3)
1 in 1 in (2)
1 1/8 in 1 1/8 in (2)
1 1/4 in 1 1/4 in (2)
1.339 in 1.339 in (1)
1 3/8 in (6)

1 1/2 in (4)

1.575 in (1)

1 5/8 in (7)

1 3/4 in (6)

1 7/8 in (19)

1.875 in (1)

1.929 in (1)

2 in (37)

2 1/8 in (18)

2.244 in (1)

2 1/4 in (19)

2.25 in (1)

2 3/8 in (16)

2.375 in (1)

2.402 in (1)

2 1/2 in (17)

2.5 in (1)

2 5/8 in (24)

2.625 in (1)

2 3/4 in (24)

2.75 in (1)

2.756 in (2)

2 7/8 in (18)

2.875 in (2)

2.953 in (2)

3 in (16)

3 1/8 in (24)

3.125 in (1)

3.150 in (1)

3 1/4 in (29)

3.25 in (1)

3 3/8 in (24)

3.386 in (1)

3 1/2 in (24)

3.5 in (2)

3 5/8 in (29)

3.625 in (1)

3.661 in (1)

3 3/4 in (30)

3.75 in (1)

3 7/8 in (24)

3.875 in (1)

3.976 in (1)

4 in (22)

4 1/8 in (32)

4.125 in (2)

4 1/4 in (17)

4.25 in (1)

4.291 in (3)

4 3/8 in (16)

4.375 in (1)

4 1/2 in (12)

4.5 in (1)

4.606 in (1)

4 5/8 in (12)

4.625 in (1)

4 3/4 in (16)

4.75 in (2)

4 7/8 in (17)

4.875 in (1)

4.921 in (1)

5 in (18)

5 1/8 in (17)

5.125 in (1)

5.236 in (2)

5 1/4 in (17)

5.25 in (1)

5 3/8 in (7)

5.375 in (1)

5 1/2 in (7)

5.5 in (1)

5.591 in (1)

5 5/8 in (7)

5.625 in (1)

5 3/4 in (7)

5.75 in (1)

5 7/8 in (7)

5.875 in (1)

5.945 in (2)

6 in (8)

6 5/8 in (5)

7 1/8 in (5)

7 5/8 in (2)

34.00 mm (3)

36.00 mm (1)

38.00 mm (6)

40.00 mm (6)

43.00 mm (5)

46.00 mm (4)

49.00 mm (6)

53.00 mm (4)

57.00 mm (9)

61.00 mm (10)

65.00 mm (11)

70.00 mm (11)

75.00 mm (13)

80.00 mm (11)

86.00 mm (17)

93.00 mm (15)

101.00 mm (15)

109.00 mm (13)

117.00 mm (14)

125.00 mm (13)

133.00 mm (12)

142.00 mm (9)

151.00 mm (10)
View more View less

Primary Material Application

Alloy Steel, Aluminum, Carbon Steel, Cast Iron, Stainless Steel Alloy Steel, Aluminum, Carbon Steel, Cast Iron, Stainless Steel (8)
Alloy Steel, Carbon Steel, Cast Iron Alloy Steel, Carbon Steel, Cast Iron (29)
Aluminum, Brass, Bronze, Cast Iron, Copper, Hardened Steel, Nickel, Steel, Titanium Aluminum, Brass, Bronze, Cast Iron, Copper, Hardened Steel, Nickel, Steel, Titanium (79)
Aluminum, Brass, Bronze, Cast Iron, Copper, Steel Aluminum, Brass, Bronze, Cast Iron, Copper, Steel (106)
Cast Iron, Steel Cast Iron, Steel (32)
High Temperature Alloy, Stainless Steel, Steel High Temperature Alloy, Stainless Steel, Steel (9)
High-Strength Alloy Steels, Stainless Steel, Titanium, Manganese Steel, Armor Plate, Inconel (28)

Nickel, Stainless Steel, Steel, Titanium (1)

Stainless Steel, Alloy Steel, Titanium (9)

Stainless Steel, Steel, Titanium (251)

Stainless Steel, Steel, Titanium, Tool and Die Steel (320)

Stainless Steel, Steel, Tool and Die Steel (77)

Stainless Steel, Tool Steel, Alloy Steel, Titanium (1)
View more View less

Cobalt Jobber-Length Drill Bits

Cobalt jobber-length drill bits tolerate higher drilling speeds and are harder and more wear-resistant than high-speed steel drill bits. They provide some shock absorption and can be used in handheld power tools. Jobber-length drill bits are the most commonly used drill-bit length. They provide a good balance of strength and accuracy when drilling into a variety of materials.

https://catalogue.grainger.ca/?hybris=true

950 Results Found

In stock at branch(0)

Branch #

Change

Find a Branch

Sort results by:

Grid List

Results per page : 16 | 32 | 48

JOBBER LENGTH DRILL BIT, 5/64 IN DRILL BIT SIZE, 1 IN FLUTE L, 2 IN L, 4XD, COBALT

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, 5/64 IN DRILL BIT SIZE, 1 IN FLUTE L, 2 IN L, 4XD, COBALT
Item # GNF2550-54008
Mfr. Model # 54008

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 1/16 inch diameter, one-inch long shank. It is for use with steel, titanium, tool and die steel, and meets the standards for NAS 907 Type J. This 55TN series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a two-inch length. Plus it has two one-inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 1/16 inch diameter, one-inch long shank. It is for use with steel, titanium, tool and die steel, and meets the standards for NAS 907 Type J. This 55TN series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a two-inch length. Plus it has two one-inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # 1275

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.70 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #3 DRILL BIT SIZE, 2½ IN FLUTE L, 3¾ IN LENGTH, COBALT

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #3 DRILL BIT SIZE, 2½ IN FLUTE L, 3¾ IN LENGTH, COBALT
Item # GNF2550-54013
Mfr. Model # 54013

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 13/64 inch diameter, 1¼ inch long shank. It is for use with steel, tool and die steel, and meets the standards for NAS 907 Type J. This 55TN series jobber length drill bit has a TiN finish, and has wire measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 13/64 inch diameter, 1¼ inch long shank. It is for use with steel, tool and die steel, and meets the standards for NAS 907 Type J. This 55TN series jobber length drill bit has a TiN finish, and has wire measurements. It is non-coolant through with a 3¾ inch length. Plus it has two 2½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $17.58 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #2 DRILL BIT SIZE, 2⅝ IN FLUTE L, 3⅞ IN LENGTH, COBALT

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #2 DRILL BIT SIZE, 2⅝ IN FLUTE L, 3⅞ IN LENGTH, COBALT
Item # GNF2550-54012
Mfr. Model # 54012

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 7/32 inch diameter, 1¼ inch long shank. It is for use with steel, tool and die steel, and meets the standards for NAS 907 Type J. This 55TN series jobber length drill bit has a TiN finish, and has wire measurements. It is non-coolant through with a 3⅞ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 7/32 inch diameter, 1¼ inch long shank. It is for use with steel, tool and die steel, and meets the standards for NAS 907 Type J. This 55TN series jobber length drill bit has a TiN finish, and has wire measurements. It is non-coolant through with a 3⅞ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $19.39 / EACH

EHC: EHC :

Qty:

Compare

COBALT TIN TIPPED JOBBER DRILL, 15/64 IN DRILL BIT SIZE, 2⅝ IN FLUTE L, SPIRAL

CHICAGO-LATROBE
COBALT TIN TIPPED JOBBER DRILL, 15/64 IN DRILL BIT SIZE, 2⅝ IN FLUTE L, SPIRAL
Item # GNF1501TTC66012
Mfr. Model # C66012

EHC: EHC :

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 15/64 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 3⅞ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 15/64 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 3⅞ inch length. Plus it has two 2⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $6.82 / EACH

EHC: EHC :

Qty:

Compare

COBALT TIN TIPPED JOBBER DRILL, 25/64 IN DRILL BIT SIZE, 3¾ IN FLUTE L, SPIRAL

CHICAGO-LATROBE
COBALT TIN TIPPED JOBBER DRILL, 25/64 IN DRILL BIT SIZE, 3¾ IN FLUTE L, SPIRAL
Item # GNF1501TTC66022
Mfr. Model # C66022

EHC: EHC :

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 25/64 inch diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 5⅛ inch length. Plus it has two 3¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 25/64 inch diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 5⅛ inch length. Plus it has two 3¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $16.53 / EACH

EHC: EHC :

Qty:

Compare

COBALT TIN TIPPED JOBBER DRILL, M DRILL BIT SIZE, 3-1/16 IN FLUTE L, 4⅜ IN L, SPIRAL

CHICAGO-LATROBE
COBALT TIN TIPPED JOBBER DRILL, M DRILL BIT SIZE, 3-1/16 IN FLUTE L, 4⅜ IN L, SPIRAL
Item # GNF1501TTC66041
Mfr. Model # C66041

EHC: EHC :

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 9/32 inch diameter, 1 5/16 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has letter measurements. It is non-coolant through with a 4⅜ inch length. Plus it has two 3 1/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 9/32 inch diameter, 1 5/16 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has letter measurements. It is non-coolant through with a 4⅜ inch length. Plus it has two 3 1/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $10.70 / EACH

EHC: EHC :

Qty:

Compare

COBALT TIN TIPPED JOBBER DRILL, V DRILL BIT SIZE, 3⅝ IN FLUTE L, 5 IN L, SPIRAL

CHICAGO-LATROBE
COBALT TIN TIPPED JOBBER DRILL, V DRILL BIT SIZE, 3⅝ IN FLUTE L, 5 IN L, SPIRAL
Item # GNF1501TTC66050
Mfr. Model # C66050

EHC: EHC :

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a ⅜ inch diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has letter measurements. It is non-coolant through with a five-inch length. Plus it has two 3⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a ⅜ inch diameter, 1⅜ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has letter measurements. It is non-coolant through with a five-inch length. Plus it has two 3⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $17.15 / EACH

EHC: EHC :

Qty:

Compare

COBALT TIN TIPPED JOBBER DRILL, #34 DRILL BIT SIZE, 1½ IN FLUTE L, 2⅝ IN L, SPIRAL

CHICAGO-LATROBE
COBALT TIN TIPPED JOBBER DRILL, #34 DRILL BIT SIZE, 1½ IN FLUTE L, 2⅝ IN L, SPIRAL
Item # GNF1501TTC66088
Mfr. Model # C66088

EHC: EHC :

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 7/64 inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has wire measurements. It is non-coolant through with a 2⅝ inch length. Plus it has two 1½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 7/64 inch diameter, 1⅛ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has wire measurements. It is non-coolant through with a 2⅝ inch length. Plus it has two 1½ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.10 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, 13/32 IN DRILL BIT SIZE, 3⅞ IN FLUTE L, COBALT, 4XD

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, 13/32 IN DRILL BIT SIZE, 3⅞ IN FLUTE L, COBALT, 4XD
Item # GNF550TA44926
Mfr. Model # 44926

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 25/64 inch diameter, 1⅜ inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 550-TA series jobber length drill bit has a TiAlN finish, and has fractional inch measurements. It is non-coolant through with a 5¼ inch length. Plus it has two 3⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 25/64 inch diameter, 1⅜ inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 550-TA series jobber length drill bit has a TiAlN finish, and has fractional inch measurements. It is non-coolant through with a 5¼ inch length. Plus it has two 3⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $51.68 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #22 DRILL BIT SIZE, 2 IN FLUTE L, 3⅛ IN L, 4XD, COBALT

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #22 DRILL BIT SIZE, 2 IN FLUTE L, 3⅛ IN L, 4XD, COBALT
Item # GNF550TA44992
Mfr. Model # 44992

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 5/32 inch diameter, 1⅛ inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 550-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 3⅛ inch length. Plus it has two 2 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 5/32 inch diameter, 1⅛ inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 550-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 3⅛ inch length. Plus it has two 2 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $11.84 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #27 DRILL BIT SIZE, 1⅞ IN FLUTE L, 3 IN L, 4XD, COBALT

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #27 DRILL BIT SIZE, 1⅞ IN FLUTE L, 3 IN L, 4XD, COBALT
Item # GNF550TA44997
Mfr. Model # 44997

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 9/64 inch diameter, 1⅛ inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 55TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 9/64 inch diameter, 1⅛ inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 55TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a three-inch length. Plus it has two 1⅞ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $11.44 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #32 DRILL BIT SIZE, 1⅝ IN FLUTE L, 2¾ IN LENGTH, COBALT

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #32 DRILL BIT SIZE, 1⅝ IN FLUTE L, 2¾ IN LENGTH, COBALT
Item # GNF550TA45002
Mfr. Model # 45002

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 7/64 inch diameter, 1⅛ inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 550-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 7/64 inch diameter, 1⅛ inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 550-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2¾ inch length. Plus it has two 1⅝ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $9.85 / EACH

EHC: EHC :

Qty:

Compare

JOBBER LENGTH DRILL BIT, #36 DRILL BIT SIZE, 1-7/16 IN FLUTE L, 2½ IN L, COBALT

CHICAGO-LATROBE
JOBBER LENGTH DRILL BIT, #36 DRILL BIT SIZE, 1-7/16 IN FLUTE L, 2½ IN L, COBALT
Item # GNF550TA45006
Mfr. Model # 45006

EHC: EHC :

This M42 jobber length drill bit is made of cobalt and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 550-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This M42 jobber length drill bit is made of cobalt and has a 3/32 inch diameter, 1 1/16 inch long shank. It is for use with steel, titanium, tool and die steel, and meets ANSI standards , NAS 907 Type J. This 550-TA series jobber length drill bit has a TiAlN finish, and has wire measurements. It is non-coolant through with a 2½ inch length. Plus it has two 1 7/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $9.69 / EACH

EHC: EHC :

Qty:

Compare

COBALT TIN TIPPED JOBBER DRILL, 3/32 IN DRILL BIT SIZE, 1¼ IN FLUTE L, SPIRAL

CHICAGO-LATROBE
COBALT TIN TIPPED JOBBER DRILL, 3/32 IN DRILL BIT SIZE, 1¼ IN FLUTE L, SPIRAL
Item # GNF1501TTC66003
Mfr. Model # C66003

EHC: EHC :

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 3/32 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 3/32 inch diameter, one-inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 2¼ inch length. Plus it has two 1¼ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $3.10 / EACH

EHC: EHC :

Qty:

Compare

COBALT TIN TIPPED JOBBER DRILL, 27/64 IN DRILL BIT SIZE, 3 15/16 IN FLUTE L, SPIRAL

CHICAGO-LATROBE
COBALT TIN TIPPED JOBBER DRILL, 27/64 IN DRILL BIT SIZE, 3 15/16 IN FLUTE L, SPIRAL
Item # GNF1501TTC66024
Mfr. Model # C66024

EHC: EHC :

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 27/64 inch diameter, 1 7/16 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has two 3 15/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 27/64 inch diameter, 1 7/16 inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has fractional inch measurements. It is non-coolant through with a 5⅜ inch length. Plus it has two 3 15/16 inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 6 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $19.14 / EACH

EHC: EHC :

Qty:

Compare

COBALT TIN TIPPED JOBBER DRILL, C DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN L, SPIRAL

CHICAGO-LATROBE
COBALT TIN TIPPED JOBBER DRILL, C DRILL BIT SIZE, 2¾ IN FLUTE L, 4 IN L, SPIRAL
Item # GNF1501TTC66032
Mfr. Model # C66032

EHC: EHC :

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 15/64 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has letter measurements. It is non-coolant through with a four-inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

This heavy-duty cobalt tin-tipped jobber drill bit is made of cobalt and has a 15/64 inch diameter, 1¼ inch long shank. It is for use with aluminum, brass, bronze, cast iron, copper, steel, and meets ASME standards. This 1501-TT series jobber length drill bit has a TiN finish, and has letter measurements. It is non-coolant through with a four-inch length. Plus it has two 2¾ inch spiral flutes, a straight shank, and a 135 Degrees split point.

View more View less
SDS Document Not Found

For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

CATALOGUE PAGE # N/A

This product must be purchased in multiples of 12 . Please update the quantity to proceed with checkout.

Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order. Check Availability:

Web Price : $7.86 / EACH

EHC: EHC :

Qty:

Compare

Grid List

Results per page : 16 | 32 | 48

Availability

Pick Up

Shipping

To view Availability, please select a Branch

To view Availability for another location, please enter postal code below Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.

Select a Branch

Selected Branch

(View on Map)

Apply

Enter the city, province, postal code or branch number.

Cancel

Please select pick up location

No Result Found.

Selected Branch

,
,

Phone :
Fax :
Hours :

No Result Found.

New Postal Code

Postal Code should be in LNLNLN format e.g. L3T7W8

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list

Add to an existing list

My List

No Existing 'My List' Found. Please Create New 'My List' first.

No Results Found

Select one or multiple lists

Create a new list

List Name

My List

You have #compareProducts out of 5 products to compare selected.

Clear All

Add Item

Hide

Show

Filter Results By

Applied Filters

Clear All

Search within these results

Cobalt Jobber-Length Drill Bits

950 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Item #	Qty

Filter Results By

Applied Filters Clear All

Search within these results

Cobalt Jobber-Length Drill Bits

950 Results Found

Add to Order List

Company Information

Resources

Services

Ordering

Customer Support

Applied Filters

Clear All