Adhesive & Sealant Surface Preparation

This blue, fast-cure wearing compound weighs six pounds. This epoxy adhesive is wear-resistant with a specific gravity of 2.337, a 2.716 VOC, and a temperature range of -22 to 221℉.

This blue, fast-cure wearing compound weighs six pounds. This epoxy adhesive is wear-resistant with a specific gravity of 2.337, a 2.716 VOC, and a temperature range of -22 to 221℉.

This PC 9599 wearing compound is blue in colour and comes in a 25 pound hobbock, pail. This wearing compound features fast cure, non- shrinking, non-sag.

This PC 9599 wearing compound is blue in colour and comes in a 25 pound hobbock, pail. This wearing compound features fast cure, non- shrinking, non-sag.

This SF 7113 accelerator is clear and comes in a 1.75 fluid ounce bottle. It meets the standards for OSHA Hazard Communication Standard (29 CFR 1910.1200).

This SF 7113 accelerator is clear and comes in a 1.75 fluid ounce bottle. It meets the standards for OSHA Hazard Communication Standard (29 CFR 1910.1200).

This SF 712 accelerator is clear and comes in a 0.7 fluid ounce aerosol can. It meets the standards for CFIA, MIL-A-46050C.

This SF 712 accelerator is clear and comes in a 0.7 fluid ounce aerosol can. It meets the standards for CFIA, MIL-A-46050C.

This SF 770 primer is clear and comes in a 1.75 fluid ounce bottle. It meets the standards for 49 CFR, NIOSH Approved, OSHA Hazard Communication Standard 29 CFR 1910.1200. This primer features improves adhesion of instant adhesives to polyolefins and other low surface energy plastics, tagliabue closed cup.

This SF 770 primer is clear and comes in a 1.75 fluid ounce bottle. It meets the standards for 49 CFR, NIOSH Approved, OSHA Hazard Communication Standard 29 CFR 1910.1200. This primer features improves adhesion of instant adhesives to polyolefins and other low surface energy plastics, tagliabue closed cup.

This Frekote PMC cleaner is clear and comes in a one gallon container. This cleaner features also cleans epoxy and metal mould surfaces, dissolves and removes wax from polyester moulds, no surface dulling.

This Frekote PMC cleaner is clear and comes in a one gallon container. This cleaner features also cleans epoxy and metal mould surfaces, dissolves and removes wax from polyester moulds, no surface dulling.

This SF 7090 activator is blue and comes in a one ounce bottle. This activator features also recommended for large gaps, low viscosity, solvent-free, suitable where prevailing temperatures are as low as less than+59 Degrees f (less than+15 Degrees c).

This SF 7090 activator is blue and comes in a one ounce bottle. This activator features also recommended for large gaps, low viscosity, solvent-free, suitable where prevailing temperatures are as low as less than+59 Degrees f (less than+15 Degrees c).

This PC 7257 repair and grouting system is grey and comes in a 10 pound bottle. This repair and grouting system features bonding to old and new concrete, bonds faster than concrete, no shrinkage, water free additive.

This PC 7257 repair and grouting system is grey and comes in a 10 pound bottle. This repair and grouting system features bonding to old and new concrete, bonds faster than concrete, no shrinkage, water free additive.

Cet accélérateur SF 7452 est orange et est livré dans une cannette d’un quart. Les accélérateurs d’adhésifs et de scellants augmentent la vitesse de durcissement d’un adhésif pour un collage rapide des matériaux. Ces accélérateurs s’utilisent avec des adhésifs instantanés et dans des applications de remplissage de grands espaces dans des environnements à taux d’humidité insuffisant pour qu’un scellant durcisse seul.

Cet accélérateur SF 7452 est orange et est livré dans une cannette d’un quart. Les accélérateurs d’adhésifs et de scellants augmentent la vitesse de durcissement d’un adhésif pour un collage rapide des matériaux. Ces accélérateurs s’utilisent avec des adhésifs instantanés et dans des applications de remplissage de grands espaces dans des environnements à taux d’humidité insuffisant pour qu’un scellant durcisse seul.

Cet apprêt et activateur SF 7649 est vert et est livré dans une bouteille de 1,75oz liq. Il répond aux normes ASTM,CFIA,MIL-S-22473E,NSF P1,NSF/ANSI 61. Cet apprêt et activateur s’utilise pour les grands écarts de collage et le durcissement à basse température (moins de 5°C), et augmente la vitesse de durcissement sur les surfaces passives et inactives.

Cet apprêt et activateur SF 7649 est vert et est livré dans une bouteille de 1,75oz liq. Il répond aux normes ASTM,CFIA,MIL-S-22473E,NSF P1,NSF/ANSI 61. Cet apprêt et activateur s’utilise pour les grands écarts de collage et le durcissement à basse température (moins de 5°C), et augmente la vitesse de durcissement sur les surfaces passives et inactives.

This SF 7471 activator is yellow and comes in a 4.5 ounce aerosol can. It meets the standards for ASTM D-5363 for New Designs, mil-S-2,2473E for Existing Designs. This activator features for large bond gaps, speeds up cure on passive and active surfaces.

This SF 7471 activator is yellow and comes in a 4.5 ounce aerosol can. It meets the standards for ASTM D-5363 for New Designs, mil-S-2,2473E for Existing Designs. This activator features for large bond gaps, speeds up cure on passive and active surfaces.

This SF 7387 activator is yellow and comes in a 4.5 fluid ounce aerosol can. It meets the standards for OSHA Hazard Communication Standard (29 CFR 1910.1200). This activator features speed up curing of most Loctite acrylic adhesives.

This SF 7387 activator is yellow and comes in a 4.5 fluid ounce aerosol can. It meets the standards for OSHA Hazard Communication Standard (29 CFR 1910.1200). This activator features speed up curing of most Loctite acrylic adhesives.

This SF 7387 activator is yellow and comes in a 1.75 fluid ounce bottle. It meets the standards for OSHA Hazard Communication Standard (29 CFR 1910.1200). This activator features speed up curing of most Loctite acrylic adhesives.

This SF 7387 activator is yellow and comes in a 1.75 fluid ounce bottle. It meets the standards for OSHA Hazard Communication Standard (29 CFR 1910.1200). This activator features speed up curing of most Loctite acrylic adhesives.

These SF 7617 hand wipes are available as 24 cm x 30.5 cm towels in canisters of 75 or 130. They are citrus-scent, leave no residue, with no drying and no rinsing necessary.

These SF 7617 hand wipes are available as 24 cm x 30.5 cm towels in canisters of 75 or 130. They are citrus-scent, leave no residue, with no drying and no rinsing necessary.

This SF 7649 activator is green in colour and comes in a one gallon can. This activator features cure accelerant and enables low temperature curing.

This SF 7649 activator is green in colour and comes in a one gallon can. This activator features cure accelerant and enables low temperature curing.