Product ITEM is unavailable. See products from the same category below.
Tarauds pour tuyaux et conduits
Les tarauds pour tuyaux et conduits sont proposés dans des normes et des tailles de filetage qui sont utilisées sur les pièces des systèmes de tuyaux et conduits, car elles permettent aux pièces assemblées de former un joint étanche à la pression. Ces tarauds permettent de créer ou de réparer des filetages internes dans les tuyaux, les conduits et les raccords afin qu’ils puissent s’accoupler avec des pièces dotées de filetages externes correspondants. Ils sont tournés à l’aide d’une clé de taraudage pour les applications de taraudage manuel ou installés dans un porte-outil sur une machine pour les applications de taraudage mécanique.
Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,437 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/8 po. De plus, il a 4 cannelures et une tige droite.
Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,437 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et une longueur de 2 1/8 po. De plus, il a 4 cannelures et une tige droite.
Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,563 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 2 7/16 po de long. De plus, il a 4 cannelures et une tige droite.
Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,563 po/une tige de 1 3/8 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 2 7/16 po de long. De plus, il a 4 cannelures et une tige droite.
Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,688 po/une tige de 1 3/4 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et mesure 3 1/8 po. De plus, il a 4 cannelures et une tige droite.
Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,688 po/une tige de 1 3/4 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et mesure 3 1/8 po. De plus, il a 4 cannelures et une tige droite.
Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,700 po/une tige de 1 1/2 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 2 9/16 po de long. De plus, il a 4 cannelures et une tige droite.
Ce taraud pour tuyau en acier rapide M2 a un diamètre de 0,700 po/une tige de 1 1/2 po de long. Pour tous les matériaux et répond aux normes ANSI. Il a un fini brillant/sans enduit et des mesures fractionnaires en po. Il est sans canal de refroidissement, a une direction à droite et est 2 9/16 po de long. De plus, il a 4 cannelures et une tige droite.
This M2 pipe tap is made of high speed steel and has a 0.312 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60105 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.
This M2 pipe tap is made of high speed steel and has a 0.312 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60105 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.
This pipe tap set includes four taper taps in thread sizes 1/8"-27, 1/4"-18, 3/8"-18, and 1/4"-14. These NPT taps are made from high speed steel and are for use in aluminum, mild steel, and stainless steel.
This pipe tap set includes four taper taps in thread sizes 1/8"-27, 1/4"-18, 3/8"-18, and 1/4"-14. These NPT taps are made from high speed steel and are for use in aluminum, mild steel, and stainless steel.
This pipe tap has a 1/4"-18 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 2 7/16 inches.
This pipe tap has a 1/4"-18 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 2 7/16 inches.
This M2 pipe tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60155 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.
This M2 pipe tap is made of high speed steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60155 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of carbon steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 312-6015 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.
This hand tap is made of carbon steel and has a 0.563 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 312-6015 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 7/16 inch length. Plus it has four flutes and a straight shank.
This M2 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60205 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has four flutes and a straight shank.
This M2 pipe tap is made of high speed steel and has a 0.700 inch diameter, 1½ inch long shank. It is designed for use with all materials, and meets ANSI standards. This 311-60205 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2 9/16 inch length. Plus it has four flutes and a straight shank.
This pipe tap has a 3/8"-18 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 2 9/16 inches.
This pipe tap has a 3/8"-18 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 2 9/16 inches.
This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-60305 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.
This M2 pipe tap is made of high speed steel and has a 0.906 inch diameter, 1⅞ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 311-60305 series pipe tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 3¼ inch length. Plus it has five flutes, a straight shank.
This hand tap is made of carbon steel and has a 0.437 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 312-6010 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.
This hand tap is made of carbon steel and has a 0.437 inch diameter, 1⅜ inch long shank. It is designed for use with all materials, and meets the standards for ANSI. This 312-6010 series hand tap has a bright (uncoated) finish, and has fractional inch measurements. It is non-coolant through, has right hand direction with a 2⅛ inch length. Plus it has four flutes and a straight shank.
This pipe tap has a 1/2"-14 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 3 1/8 inches.
This pipe tap has a 1/2"-14 thread and has a shank diameter of 0.437 inches. The NPT threads are made of high-speed steel and it has an overall length of 3 1/8 inches.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
